1. Hardness: After being treated with penetrating sealing hardening materials, the Mohs hardness of the ground will reach 8 to 9, increasing by approximately 45%.

2. Wear resistance: Penetrating sealing hardening materials can solidify various components in concrete into a hard entity, increasing hardness and density. After the ground used for curing, the wear resistance will increase by more than 8 times.

3. Dust-proof: The penetrating sealing hardening material undergoes a chemical reaction with the silicate in the concrete, forming a dust-free and dense whole on the concrete surface, permanently controlling the precipitation of concrete dust from the surface voids.

4. Anti-slip: On ordinary concrete floors, salt and alkali components will leach out from the surface, causing slipping. However, the ground treated with permeable sealing hardening materials is different. It forms a solid and dense whole on the concrete surface, and the salt and alkali components will not leach out from the surface.

5. Compressive strength: The compressive strength of the treated specimens is 25% higher than that of the untreated specimens, and the flexural strength is also improved.

6. Impermeability: Penetrating sealing hardening materials can effectively penetrate into the concrete and undergo chemical reactions with it, locking the pores inside and providing a permanent sealing effect on the concrete surface. This can effectively prevent water, oil and other surface contaminants from entering the concrete.

7. Resistance to weathering: Water spraying has no adverse effect on the treated samples and can effectively prevent the passage of chloride ions. Tests show that the effect of the treated ground will not be affected by exposure to electromagnetic fields or water mist.

8. Corrosion resistance: After the ground is treated with penetrating sealing hardening materials, the corrosion resistance of the concrete will be greatly enhanced.

9. Brightness: After being treated with penetrating sealing hardening materials, the concrete floor will have a marble-like luster, and the luster will get better with longer use.

10. Environmental protection: Penetrating sealing and hardening materials are concrete sealing, dust-proof and wear-resistant hardeners. They are colorless, odorless, non-toxic and non-flammable, which can make concrete firm and dust-proof.

Base surface treatment:
First, thoroughly grind the floor with a grinding disc of 50 to 300 mesh until it feels smooth to the touch. Then, use a vacuum cleaner or other tools to thoroughly clean the dust on the floor to ensure that the floor's capillary pores can fully absorb the material.

Spray wine material:
Spray 1 to 3 coats of SPR-37102Na enhanced type (1:1 with water)/SPR-37105Li crystal permeable liquid concrete sealant and hardener until there are crystals on the surface. Let it naturally penetrate for 30 to 60 minutes, then rinse the ground with clean water (crystal-penetrating liquid concrete sealant and hardener does not require rinsing), and use a floor scrubber to clean the surface crystals thoroughly.

Preliminary polishing:
After curing for 3 to 6 hours until the ground is completely dry, use a 500-mesh grinding disc to grind it 1 to 2 times.

Spray wine material:
Apply the SPR-37101C universal type /SPR-37105Li crystal-clear liquid concrete sealant and hardener evenly on the ground with a sprayer. Let it react for about 10 to 30 minutes, then rinse the ground with clean water (crystal-clear liquid concrete sealant and hardener does not require rinsing), and use a floor scrubber to clean the surface crystals thoroughly.

Fine polishing:
Finely grind the surface with a 800-3000 day grinding disc until the surface meets the smoothness requirements. For places with extremely high brightness requirements, spray the SPR-37207C protective agent with a sprayer. After the surface dries, polish it with a resin grinding disc. Excessive polishing should be avoided. If waxing is needed, apply the selected floor wax to the floor surface, but do not apply it excessively. After drying for about 1 to 3 hours, polish with a polishing pad until the desired brightness is achieved. Avoid over-polishing.

1. Environments that require cleanliness, have certain requirements for dust content in the air, but are not suitable for surface coating materials.

2. Any new or old concrete base surfaces, terrazzo, cement-based wear-resistant floors, and cement mortar surface layers with cement as the base material that require hardness, high wear resistance, and high impermeability both indoors and outdoors, such as factories, shopping centers, warehouses, parking lots, service stations, aircraft hangars, freight distribution centers, and other areas.