1. Good wear resistance, scratch resistance and anti-slip effect;

2. Slightly rough surface can reduce tire noise;

3. Excellent adhesion and good compatibility with multiple systems;

4. Good weather resistance and chemical resistance;

5. Environmentally friendly and low-odor during construction;

6. Matte or semi-gloss effect, with a soft and elegant luster, avoiding dazzling effects.

Substrate treatment:
Grind and clean the ground, ensuring that the base material is dry and free of hollowing.

Primer application:
It can be evenly applied to the base surface by brushing, roller coating, spraying and other processes. The primer application is strictly prohibited by scraping.

ECC Self-leveling mortar coating:
After stirring, immediately use a trowel to apply the material to the dry surface where the primer has been applied, allowing it to flow naturally and eliminate bubbles.

Primer application:
Enhance penetration and adhesion;

Topcoat application:
Apply the topcoat twice first.

Topcoat application:
Apply the high-wear-resistant polyurethane topcoat by first scraping and then rolling once.

It is mainly applied to the floors of factories, underground garages, commercial and office buildings with anti-slip, wear-resistant and matte requirements. It can be used on ordinary epoxy self-leveling, flat coating systems and ordinary polyurethane topcoats to enhance scratch resistance, wear resistance and anti-slip safety. At the same time, it has the functions of reducing tire noise and reducing reflection. This product is weather-resistant and can be applied in outdoor areas where color retention is required.