1. This product is composed of modified MMA resin and anti-slip raw materials. After application, the material can form a concave-convex surface, achieving an excellent anti-slip effect.

2. Wear-resistant, long service life, water-resistant, oil-resistant and resistant to various detergents;

3. It has strong weather resistance and ductility, making it suitable for asphalt bases.

4. Water-based materials, low-carbon and environmentally friendly.

Cement base ground:
Use a grinding machine to grind the entire base surface, remove the floating slurry, clean the base surface, and repair the damaged parts of the base surface with mortar. The concrete surface must be clean, dry and firm to ensure that the water-based MMA primer achieves the maximum adhesion to the base layer.

Asphalt base ground:
It is necessary to drive normally for more than half a year, fully compact and wear off the excess asphalt on the surface to reduce the risk of cracking and peeling caused by asphalt shrinkage. Before construction, the surface of the base should be cleaned thoroughly to ensure that the water-based MMA primer achieves the maximum adhesion to the base layer.

Primer coating:
Mix the SPR-58106C water-based MMA primer A agent and B agent in proportion thoroughly and evenly, and apply it evenly on the clean base with a roller.

Anti-slip layer:
Thoroughly mix the SPR58107P water-based MMA topcoat A and B agents in proportion, add the gradation sand and stir to form mortar. The total mixing time should be controlled within 3 to 5 minutes. Apply it evenly on the primer with a trowel. (Note: Do not add water to dilute it at will.)

Surface coating:
Thoroughly mix the SPR58107P water-based MMA topcoat A and B agents in proportion, add fine sand and stir to form a mortar, then evenly spray it on the anti-slip layer.

It is applicable to areas with anti-slip requirements such as pedestrian passages, urban greenways, and park walking paths.